From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> To: linux-media@vger.kernel.org, laurent.pinchart@ideasonboard.com Cc: dafna.hirschfeld@collabora.com, helen.koike@collabora.com, ezequiel@collabora.com, hverkuil@xs4all.nl, kernel@collabora.com, dafna3@gmail.com, sakari.ailus@linux.intel.com, linux-rockchip@lists.infradead.org, mchehab@kernel.org, tfiga@chromium.org, skhan@linuxfoundation.org, niklas.soderlund@ragnatech.se--annotate Subject: [PATCH v4 4/5] media: staging: rkisp1: cap: use v4l2_pipeline_stream_{enable,disable} helpers Date: Fri, 22 May 2020 09:55:21 +0200 Message-ID: <20200522075522.6190-5-dafna.hirschfeld@collabora.com> (raw) In-Reply-To: <20200522075522.6190-1-dafna.hirschfeld@collabora.com> From: Helen Koike <helen.koike@collabora.com> Use v4l2_pipeline_stream_{enable,disable} to call .s_stream() subdevice callbacks through the pipeline. Those helpers are called only if the other capture is not streaming. If the other capture is streaming then he already did that for us so we call s_stream only on the resizer that is connected to the capture node. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> --- drivers/staging/media/rkisp1/rkisp1-capture.c | 104 ++++++------------ 1 file changed, 32 insertions(+), 72 deletions(-) diff --git a/drivers/staging/media/rkisp1/rkisp1-capture.c b/drivers/staging/media/rkisp1/rkisp1-capture.c index 008c070373f8..d53a8549da77 100644 --- a/drivers/staging/media/rkisp1/rkisp1-capture.c +++ b/drivers/staging/media/rkisp1/rkisp1-capture.c @@ -806,71 +806,6 @@ static void rkisp1_return_all_buffers(struct rkisp1_capture *cap, spin_unlock_irqrestore(&cap->buf.lock, flags); } -/* - * rkisp1_pipeline_sink_walk - Walk through the pipeline and call cb - * @from: entity at which to start pipeline walk - * @until: entity at which to stop pipeline walk - * - * Walk the entities chain starting at the pipeline video node and stop - * all subdevices in the chain. - * - * If the until argument isn't NULL, stop the pipeline walk when reaching the - * until entity. This is used to disable a partially started pipeline due to a - * subdev start error. - */ -static int rkisp1_pipeline_sink_walk(struct media_entity *from, - struct media_entity *until, - int (*cb)(struct media_entity *from, - struct media_entity *curr)) -{ - struct media_entity *entity = from; - struct media_pad *pad; - unsigned int i; - int ret; - - while (1) { - pad = NULL; - /* Find remote source pad */ - for (i = 0; i < entity->num_pads; i++) { - struct media_pad *spad = &entity->pads[i]; - - if (!(spad->flags & MEDIA_PAD_FL_SINK)) - continue; - pad = media_entity_remote_pad(spad); - if (pad && is_media_entity_v4l2_subdev(pad->entity)) - break; - } - if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) - break; - - entity = pad->entity; - if (entity == until) - break; - - ret = cb(from, entity); - if (ret) - return ret; - } - - return 0; -} - -static int rkisp1_pipeline_disable_cb(struct media_entity *from, - struct media_entity *curr) -{ - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr); - - return v4l2_subdev_call(sd, video, s_stream, false); -} - -static int rkisp1_pipeline_enable_cb(struct media_entity *from, - struct media_entity *curr) -{ - struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(curr); - - return v4l2_subdev_call(sd, video, s_stream, true); -} - static void rkisp1_stream_stop(struct rkisp1_capture *cap) { int ret; @@ -888,6 +823,36 @@ static void rkisp1_stream_stop(struct rkisp1_capture *cap) } } +static int rkisp1_s_stream_subdev(struct rkisp1_capture *cap, int enable) +{ + struct rkisp1_device *rkisp1 = cap->rkisp1; + struct rkisp1_capture *other = &rkisp1->capture_devs[cap->id ^ 1]; + int ret; + + /* + * if the other capture is already streaming then we only need to + * call s_stream of our reszier + */ + if (other->is_streaming) { + struct v4l2_subdev *rsz_sd = &rkisp1->resizer_devs[cap->id].sd; + + ret = v4l2_subdev_call(rsz_sd, video, s_stream, enable); + if (ret && ret != -ENOIOCTLCMD) + dev_err(rkisp1->dev, + "stream %s resizer '%s' failed (%d)\n", + enable ? "on" : "off", rsz_sd->name, ret); + } else { + if (enable) + ret = v4l2_pipeline_stream_enable(&cap->vnode.vdev); + else + ret = v4l2_pipeline_stream_disable(&cap->vnode.vdev); + if (ret < 0) + dev_err(rkisp1->dev, "stream subdevs %s failed %d\n", + enable ? "on" : "off", ret); + } + return ret; +} + static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue) { struct rkisp1_capture *cap = queue->drv_priv; @@ -898,11 +863,7 @@ static void rkisp1_vb2_stop_streaming(struct vb2_queue *queue) mutex_lock(&cap->rkisp1->stream_lock); rkisp1_stream_stop(cap); - ret = rkisp1_pipeline_sink_walk(&node->vdev.entity, NULL, - rkisp1_pipeline_disable_cb); - if (ret) - dev_err(rkisp1->dev, - "pipeline stream-off failed error:%d\n", ret); + rkisp1_s_stream_subdev(cap, 0); rkisp1_return_all_buffers(cap, VB2_BUF_STATE_ERROR); @@ -986,8 +947,7 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count) rkisp1_stream_start(cap); /* start sub-devices */ - ret = rkisp1_pipeline_sink_walk(entity, NULL, - rkisp1_pipeline_enable_cb); + ret = rkisp1_s_stream_subdev(cap, 1); if (ret) goto err_stop_stream; -- 2.17.1
next prev parent reply other threads:[~2020-05-22 7:56 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-22 7:55 [PATCH v4 0/5] media: add v4l2_pipeline_stream_{enable,disable} Dafna Hirschfeld 2020-05-22 7:55 ` [PATCH v4 1/5] media: mc-entity.c: add media_graph_walk_next_stream() Dafna Hirschfeld 2020-05-22 7:55 ` [PATCH v4 2/5] media: v4l2-common: add helper functions to call s_stream() callbacks Dafna Hirschfeld 2020-05-25 9:23 ` Sakari Ailus 2020-05-25 9:42 ` Dafna Hirschfeld 2020-05-25 10:03 ` Sakari Ailus 2020-05-25 10:45 ` Dafna Hirschfeld 2020-06-22 9:20 ` Sakari Ailus 2020-06-22 9:00 ` Hans Verkuil 2020-06-22 14:07 ` Dafna Hirschfeld 2020-05-22 7:55 ` [PATCH v4 3/5] media: staging: rkisp1: validate links before powering and streaming Dafna Hirschfeld 2020-06-10 17:00 ` Tomasz Figa 2020-05-22 7:55 ` Dafna Hirschfeld [this message] 2020-06-10 17:03 ` [PATCH v4 4/5] media: staging: rkisp1: cap: use v4l2_pipeline_stream_{enable,disable} helpers Tomasz Figa 2020-06-10 17:22 ` Dafna Hirschfeld 2020-06-10 17:28 ` Tomasz Figa 2020-05-22 7:55 ` [PATCH v4 5/5] media: vimc: " Dafna Hirschfeld 2020-05-22 9:06 ` [PATCH v4 0/5] media: add v4l2_pipeline_stream_{enable,disable} Helen Koike 2020-05-26 16:11 ` Tomasz Figa 2020-05-26 18:57 ` Laurent Pinchart 2020-05-28 16:21 ` Dafna Hirschfeld 2020-05-29 13:26 ` Tomasz Figa 2020-05-29 13:27 ` Tomasz Figa 2020-05-29 13:49 ` Helen Koike 2020-05-29 14:48 ` Tomasz Figa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200522075522.6190-5-dafna.hirschfeld@collabora.com \ --to=dafna.hirschfeld@collabora.com \ --cc=dafna3@gmail.com \ --cc=ezequiel@collabora.com \ --cc=helen.koike@collabora.com \ --cc=hverkuil@xs4all.nl \ --cc=kernel@collabora.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mchehab@kernel.org \ --cc=niklas.soderlund@ragnatech.se--annotate \ --cc=sakari.ailus@linux.intel.com \ --cc=skhan@linuxfoundation.org \ --cc=tfiga@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Unnamed repository; edit this file 'description' to name the repository. This inbox may be cloned and mirrored by anyone: git clone --mirror http://archive.lwn.net:8080/linux-media/0 linux-media/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 linux-media linux-media/ http://archive.lwn.net:8080/linux-media \ linux-media@vger.kernel.org lwn-linux-media@archive.lwn.net public-inbox-index linux-media Example config snippet for mirrors. Newsgroup available over NNTP: nntp://archive.lwn.net/lwn.kernel.linux-media AGPL code for this site: git clone https://public-inbox.org/public-inbox.git