From: Marek Szyprowski <m.szyprowski@samsung.com>
To: dri-devel@lists.freedesktop.org,
iommu@lists.linux-foundation.org, linaro-mm-sig@lists.linaro.org,
linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Christoph Hellwig <hch@lst.de>,
Robin Murphy <robin.murphy@arm.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
linux-arm-kernel@lists.infradead.org,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Pawel Osciak <pawel@osciak.com>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org
Subject: [PATCH v7 36/36] videobuf2: use sgtable-based scatterlist wrappers
Date: Fri, 19 Jun 2020 12:36:36 +0200
Message-ID: <20200619103636.11974-37-m.szyprowski@samsung.com> (raw)
In-Reply-To: <20200619103636.11974-1-m.szyprowski@samsung.com>
Use recently introduced common wrappers operating directly on the struct
sg_table objects and scatterlist page iterators to make the code a bit
more compact, robust, easier to follow and copy/paste safe.
No functional change, because the code already properly did all the
scaterlist related calls.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
.../common/videobuf2/videobuf2-dma-contig.c | 34 ++++++++-----------
.../media/common/videobuf2/videobuf2-dma-sg.c | 32 +++++++----------
.../common/videobuf2/videobuf2-vmalloc.c | 12 +++----
3 files changed, 31 insertions(+), 47 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index f4b4a7c135eb..0a16a85f0284 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -53,10 +53,10 @@ static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
unsigned int i;
unsigned long size = 0;
- for_each_sg(sgt->sgl, s, sgt->nents, i) {
+ for_each_sgtable_dma_sg(sgt, s, i) {
if (sg_dma_address(s) != expected)
break;
- expected = sg_dma_address(s) + sg_dma_len(s);
+ expected += sg_dma_len(s);
size += sg_dma_len(s);
}
return size;
@@ -99,8 +99,7 @@ static void vb2_dc_prepare(void *buf_priv)
if (!sgt || buf->db_attach)
return;
- dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir);
+ dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
}
static void vb2_dc_finish(void *buf_priv)
@@ -112,7 +111,7 @@ static void vb2_dc_finish(void *buf_priv)
if (!sgt || buf->db_attach)
return;
- dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+ dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
}
/*********************************************/
@@ -273,8 +272,8 @@ static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf,
* memory locations do not require any explicit cache
* maintenance prior or after being used by the device.
*/
- dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
sg_free_table(sgt);
kfree(attach);
db_attach->priv = NULL;
@@ -299,8 +298,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
/* release any previous cache */
if (attach->dma_dir != DMA_NONE) {
- dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
attach->dma_dir = DMA_NONE;
}
@@ -308,9 +307,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
* mapping to the client with new direction, no cache sync
* required see comment in vb2_dc_dmabuf_ops_detach()
*/
- sgt->nents = dma_map_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
- dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
- if (!sgt->nents) {
+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC)) {
pr_err("failed to map scatterlist\n");
mutex_unlock(lock);
return ERR_PTR(-EIO);
@@ -423,8 +421,8 @@ static void vb2_dc_put_userptr(void *buf_priv)
* No need to sync to CPU, it's already synced to the CPU
* since the finish() memop will have been called before this.
*/
- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
pages = frame_vector_pages(buf->vec);
/* sgt should exist only if vector contains pages... */
BUG_ON(IS_ERR(pages));
@@ -521,9 +519,8 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
* No need to sync to the device, this will happen later when the
* prepare() memop is called.
*/
- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
- if (sgt->nents <= 0) {
+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC)) {
pr_err("failed to map scatterlist\n");
ret = -EIO;
goto fail_sgt_init;
@@ -545,8 +542,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
return buf;
fail_map_sg:
- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
fail_sgt_init:
sg_free_table(sgt);
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
index 92072a08af25..08c40311eea0 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
@@ -142,9 +142,8 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs,
* No need to sync to the device, this will happen later when the
* prepare() memop is called.
*/
- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
- if (!sgt->nents)
+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC))
goto fail_map;
buf->handler.refcount = &buf->refcount;
@@ -180,8 +179,8 @@ static void vb2_dma_sg_put(void *buf_priv)
if (refcount_dec_and_test(&buf->refcount)) {
dprintk(1, "%s: Freeing buffer of %d pages\n", __func__,
buf->num_pages);
- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
if (buf->vaddr)
vm_unmap_ram(buf->vaddr, buf->num_pages);
sg_free_table(buf->dma_sgt);
@@ -202,8 +201,7 @@ static void vb2_dma_sg_prepare(void *buf_priv)
if (buf->db_attach)
return;
- dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir);
+ dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
}
static void vb2_dma_sg_finish(void *buf_priv)
@@ -215,7 +213,7 @@ static void vb2_dma_sg_finish(void *buf_priv)
if (buf->db_attach)
return;
- dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
+ dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
}
static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
@@ -258,9 +256,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
* No need to sync to the device, this will happen later when the
* prepare() memop is called.
*/
- sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
- buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
- if (!sgt->nents)
+ if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
+ DMA_ATTR_SKIP_CPU_SYNC))
goto userptr_fail_map;
return buf;
@@ -286,8 +283,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
dprintk(1, "%s: Releasing userspace buffer of %d pages\n",
__func__, buf->num_pages);
- dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir,
- DMA_ATTR_SKIP_CPU_SYNC);
+ dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
if (buf->vaddr)
vm_unmap_ram(buf->vaddr, buf->num_pages);
sg_free_table(buf->dma_sgt);
@@ -410,8 +406,7 @@ static void vb2_dma_sg_dmabuf_ops_detach(struct dma_buf *dbuf,
/* release the scatterlist cache */
if (attach->dma_dir != DMA_NONE)
- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
sg_free_table(sgt);
kfree(attach);
db_attach->priv = NULL;
@@ -436,15 +431,12 @@ static struct sg_table *vb2_dma_sg_dmabuf_ops_map(
/* release any previous cache */
if (attach->dma_dir != DMA_NONE) {
- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
attach->dma_dir = DMA_NONE;
}
/* mapping to the client with new direction */
- sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- dma_dir);
- if (!sgt->nents) {
+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
pr_err("failed to map scatterlist\n");
mutex_unlock(lock);
return ERR_PTR(-EIO);
diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
index c66fda4a65e4..bf5ac63a5742 100644
--- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
+++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
@@ -229,7 +229,7 @@ static int vb2_vmalloc_dmabuf_ops_attach(struct dma_buf *dbuf,
kfree(attach);
return ret;
}
- for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ for_each_sgtable_sg(sgt, sg, i) {
struct page *page = vmalloc_to_page(vaddr);
if (!page) {
@@ -259,8 +259,7 @@ static void vb2_vmalloc_dmabuf_ops_detach(struct dma_buf *dbuf,
/* release the scatterlist cache */
if (attach->dma_dir != DMA_NONE)
- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
sg_free_table(sgt);
kfree(attach);
db_attach->priv = NULL;
@@ -285,15 +284,12 @@ static struct sg_table *vb2_vmalloc_dmabuf_ops_map(
/* release any previous cache */
if (attach->dma_dir != DMA_NONE) {
- dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- attach->dma_dir);
+ dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
attach->dma_dir = DMA_NONE;
}
/* mapping to the client with new direction */
- sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
- dma_dir);
- if (!sgt->nents) {
+ if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
pr_err("failed to map scatterlist\n");
mutex_unlock(lock);
return ERR_PTR(-EIO);
--
2.17.1
next prev parent reply other threads:[~2020-06-19 10:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200619103636.11974-1-m.szyprowski@samsung.com>
[not found] ` <CGME20200619103711eucas1p188e07cb9aaad13d39238aac4fe84b10c@eucas1p1.samsung.com>
2020-06-19 10:36 ` [PATCH v7 27/36] drm: rcar-du: fix common struct sg_table related issues Marek Szyprowski
[not found] ` <CGME20200619103714eucas1p18db6efd1a380fc0bdb16174ee85036fa@eucas1p1.samsung.com>
2020-06-19 10:36 ` [PATCH v7 31/36] staging: tegra-vde: " Marek Szyprowski
2020-06-20 21:10 ` kernel test robot
2020-06-21 4:00 ` Dmitry Osipenko
2020-06-30 10:07 ` Marek Szyprowski
2020-07-01 1:45 ` Dmitry Osipenko
[not found] ` <CGME20200619103717eucas1p23b82366794c92cc70c0492e4ca29c4a1@eucas1p2.samsung.com>
2020-06-19 10:36 ` [PATCH v7 35/36] media: pci: fix common ALSA DMA-mapping related codes Marek Szyprowski
[not found] ` <CGME20200619103718eucas1p11cd577b435672197f48bfcba2d06bc18@eucas1p1.samsung.com>
2020-06-19 10:36 ` Marek Szyprowski [this message]
[not found] ` <CGME20200630104527eucas1p13f19c24ff053556fb1fa7dc72be14c77@eucas1p1.samsung.com>
2020-06-30 10:45 ` [PATCH v8] videobuf2: use sgtable-based scatterlist wrappers Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200619103636.11974-37-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=airlied@linux.ie \
--cc=b.zolnierkie@samsung.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hch@lst.de \
--cc=hverkuil-cisco@xs4all.nl \
--cc=iommu@lists.linux-foundation.org \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=pawel@osciak.com \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Unnamed repository; edit this file 'description' to name the repository.
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://archive.lwn.net:8080/linux-media/0 linux-media/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 linux-media linux-media/ http://archive.lwn.net:8080/linux-media \
linux-media@vger.kernel.org lwn-linux-media@archive.lwn.net
public-inbox-index linux-media
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://archive.lwn.net/lwn.kernel.linux-media
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git